Thermo-Cycler Industries Inc.    P.O. Box 22,  111 E. Hamilton St. Union Mills, IN 46382    (866) 767-2990
 2018 Thermo-Cycler Industries Inc .
Words from Thermo-Cycler ®  Customers ProAir, LLC Marshall Machine Shop J.V. Mechanical McCoy Heating & Cooling Boride Abrasives Versatube Christenson - 20 Years Later Magic Wand Palm Aire
We have been installing ThermoCycler systems for fourteen years.  It is the best, most efficient, comfortable heating system available for larger buildings.  Thanks to the excellent engineering, 100% of our customers are satisfied. Thank you, Thank you, ThermoCycler staff. Chuck Weller, President McCoy Heating & Cooling, Bay City, MI
We purchased a GTC400 for a newly constructed installation center and could not be happier with the performance of the system.  Our main warehouse and manufacturing facility uses radiant heaters.  We are so impressed with the operation and future fuel cost savings of the GTC400, we are already planning on replacing the radiant heaters in our main facility with a Thermocycler unit. Marc Dunderman, Vice President of Operations ProAir LLC, Elkhart, IN
Just a short word telling you folks about the fabulous product you have.  Not only am I able to maintain a constant 70 degree temperature in my facility. I am also saving approximately $1800 to $2000 annually on the price of natural gas consumption.  Living up here in Traverse City, Michigan being able to accomplish that, the president of our company thinks I am a pretty good guy, not to mention the appreciation of the shop personnel. Ernie Fryer Boride Abrasives, Traverse City, MI
I am writing you this note to express my great pleasure with the performance of your ThermoCycler heaters.  We recently moved into our newly constructed building where the ThermoCyclers were installed.  Our heating cost for December 2001 was $808.39 and January 2002 was $533.75.  Las year for December 2000, our bill was $15,193.00 and January was $8,310.00. OUr old facility was heated by both forced air heating and radiant heaters. I am very happy Wagner Construction talked me into using your system.  Great job, great product and best wishes to all at Thermo-Cycler Industries. Fred L Lands, President Palm Aire, Inc., Elkhart, IN
At MMSI we have 2 buildings with Thermocycler heaters.  In our welding building, the Thermocycler runs in line with out air filtration unit.  The Thermocyclers keep the floor and ceiling temps within 2 degrees of each other.  This, we feel, keeps our heating costs at about 50% less that other heat sources. Doug Anderson, Owner Marshall Machine Shop, Inc., Marshall, MN
I just wanted to drop you a note to tell you that your ThermoCycler heating unit that we installed in our 24,000 sq.ft. warehouse is everything that was promised! I must tell you that there were some folks in our organization that thought I was crazy prior to the installation but they are on the bandwagon now.  Job well done!!! Please pass our satisfaction along to all of your employees. Tim Soder, President VersaTube Building Systems, Collierville, TN
Last year we purchased two of the ThermoCycler units to heat our new 43,000 square foot manufacturing facility with a 35 ft eave height.  We were astonished at the incredible savings.  We are extremely impressed with it and so is every person who has seen it.  We would be more than happy to recommend the ThermoCycler to your prospective customers. Bill Daugherty, President Magic Wand Car Wash Systems, Bristol, VA
We have installed over twenty Thermocyclers since 2003.  The product and the company are easy to work with.  Most important is that fact that we can give our customer a heating system that meets or exceeds their expectations in comfort and energy efficiency. Joseph V. Waskiewicz, JR., President J.V. Mechanical Contractors, Inc., Webster, MA
After 20 years, the units are so trouble free we often forget about checking them. Have anyone call me about the ThermoCycler comfort, performance, reliability. Better yet, invite them to visit Christenson Chevrolet in Highland, Indiana. You cannot beat a deal like this! Dean Christenson Christenson Cheverolet, Highland, IN
Pre-Engineering Energy Efficient Thermo Rotation   AirTurnover Heating, Cooling and Ventilation Solutions for Warehouse and Industrial Buildings Since 1984!
Words from Thermo-Cycler Customers
We have been installing ThermoCycler systems for fourteen years.  It is the best, most efficient, comfortable heating system available for larger buildings.  Thanks to the excellent engineering, 100% of our customers are satisfied. Thank you, Thank you, ThermoCycler staff. Chuck Weller, President McCoy Heating & Cooling, Bay City, MI
We purchased a GTC400 for a newly constructed installation center and could not be happier with the performance of the system.  Our main warehouse and manufacturing facility uses radiant heaters.  We are so impressed with the operation and future fuel cost savings of the GTC400, we are already planning on replacing the radiant heaters in our main facility with a Thermocycler unit. Marc Dunderman, Vice President of Operations ProAir LLC, Elkhart, IN
Just a short word telling you folks about the fabulous product you have.  Not only am I able to maintain a constant 70 degree temperature in my facility. I am also saving approximately $1800 to $2000 annually on the price of natural gas consumption.  Living up here in Traverse City, Michigan being able to accomplish that, the president of our company thinks I am a pretty good guy, not to mention the appreciation of the shop personnel. Ernie Fryer Boride Abrasives, Traverse City, MI
I am writing you this note to express my great pleasure with the performance of your ThermoCycler heaters.  We recently moved into our newly constructed building where the ThermoCyclers were installed.  Our heating cost for December 2001 was $808.39 and January 2002 was $533.75.  Las year for December 2000, our bill was $15,193.00 and January was $8,310.00. OUr old facility was heated by both forced air heating and radiant heaters. I am very happy Wagner Construction talked me into using your system.  Great job, great product and best wishes to all at Thermo-Cycler Industries. Fred L Lands, President Palm Aire, Inc., Elkhart, IN
At MMSI we have 2 buildings with Thermocycler heaters.  In our welding building, the Thermocycler runs in line with out air filtration unit.  The Thermocyclers keep the floor and ceiling temps within 2 degrees of each other.  This, we feel, keeps our heating costs at about 50% less that other heat sources. Doug Anderson, Owner Marshall Machine Shop, Inc., Marshall, MN
I just wanted to drop you a note to tell you that your ThermoCycler heating unit that we installed in our 24,000 sq.ft. warehouse is everything that was promised! I must tell you that there were some folks in our organization that thought I was crazy prior to the installation but they are on the bandwagon now.  Job well done!!! Please pass our satisfaction along to all of your employees. Tim Soder, President VersaTube Building Systems, Collierville, TN
Last year we purchased two of the ThermoCycler units to heat our new 43,000 square foot manufacturing facility with a 35ft eave height.  We were astonished at the incredible savings.  We are extremely impressed with it and so is every person who has seen it.  We would be more than happy to recommend the ThermoCycler to your prospective customers. Bill Daugherty, President Magic Wand Car Wash Systems, Bristol, VA
We have installed over twenty Thermocyclers since 2003.  The product and the company are easy to work with.  Most important is that fact that we can give our customer a heating system that meets or exceeds their expectations in comfort and energy efficiency. Joseph V. Waskiewicz, JR., President J.V. Mechanical Contractors, Inc., Webster, MA
After 20 years, the units are so trouble free we often forget about checking them. Have anyone call me about the ThermoCycler comfort, performance, reliability. Better yet, invite them to visit Christenson Chevrolet in Highland, Indiana. You cannot beat a deal like this! Dean Christenson Christenson Cheverolet, Highland, IN
Energy Efficient ThermoRotation    Air Turnover Heating and Ventilation Systems for Warehouses and Pre-Engineered Industrial Buildings Thermo-Cycler Industries Inc.    P.O. Box 22,  111 E. Hamilton St. Union Mills, IN 46382    (866) 767-2990   2018 Thermo-Cycler Industries Inc. Pre-Engineering Energy Efficient Thermo Rotation   AirTurnover Heating, Cooling  and Ventilation Solutions for Warehouse and Industrial Buildings Since 1984!